In this article we’re going to examine how to create your own dog mask. We’ll cover the basics and then go on to take a look at a number of the more advanced tips and techniques that you can use.

If you have a dog that likes to bark, and especially if your dog loves to play in the garden and other areas of the home, you will need to get them some special dog protection.

Paper Plate 3d Dog Mask DIY Materials: This is the first part of the set-up that will look a little scary at first, but it’s actually quite simple. All you’ve got to do is take a cardboard cutting board and cut the cardboard into the shape of your mask. You can’t just cut a rectangular shape from the cardboard, so http://listcrown.com/?p=23798 you’ll have to cut around the edge of the mask so that you get something which resembles a cone. The most important thing here is to be realistic with what type of paper plate which you’re using.

Then you will need to wrap the cardboard around the edges of the paper plate, making sure that there is a good seal between the two pieces so you can ensure that nothing will leak when you put the mask on. Make sure that the edges are cut so the edges aren’t sharp, as this may damage the edges of the mask.

Glue it on! The next step involves using some paint. You ought to spray the paint over the cardboard, making certain it runs smoothly and evenly across the whole mask. You’ll want to start with one side of the mask first, so you can work your way round it before moving onto the other side. The paint needs to be slightly thicker than the cardboard, and it is best that you leave about one-third of an inch of paint on the edges so that it runs across the cardboard.

Don’t fret too much about the paint getting stuck to your mask. It’s easy to remove it later, and it will leave you with a nice finished mask to show off to everybody! It’s also a good idea to wash away any excess paint once you’re done, so you don’t wind up with smudges or smears on your dog.

Then it is time to paste the mask on your dog’s head. First you will need to make sure that you have a secure fit between the mask and your dog’s head. As soon as you’ve made sure that it is secure, then you can start to glue the mask on the dog’s face. Take the piece of cardboard that is used for the base of the mask and fold it over. Be sure that it’s quite strong and then use your hands to secure the cardboard down in place.

Keep your hands out of the way and use tape to hold it in place as you repeat the process on the cardboard folds until you’ve got the mask snugged securely onto the surface of your dog. Do not make the folds too big or else it could look messy. Once you’ve done this, you can then take out the mask and then attach the cardboard ears. And attach the other area of the mask on the dog. Make certain the ears are level and be certain it’s not too short or long as this will cause some problems with the mask slipping off the dog’s face.

If you are using a dog mask as your pet security, you will need to do some sanding to be sure that it is safe on your dog. You can accomplish this by sanding off any excess paper that may have been removed from your mask.